BlendJet 2 Not Charging? (Here is the fix)

Hey, are you facing an blendjet 2 not charging issue? Not able to guess what went wrong? I have added below few checks to identify the root cause and solve blendjet 2 won’t charge issue as well.

BlendJet 2 Not Charging

BlendJet 2 Not Charging Overview

In today’s fast-paced world, the BlendJet 2 has become a convenient and popular choice for people seeking a portable blending solution. However, encountering issues with its charging functionality can be frustrating. In this article, we’ll delve into the common reasons behind BlendJet 2 not charging and provide a comprehensive troubleshooting guide to help you get your device back on track.

Check the Power Source

Is the Power Outlet Active?

Before jumping to conclusions about your BlendJet 2, ensure your power outlet is operational. Plug in another device to verify if the outlet is delivering power.

Verify the USB Cable and Adapter

blendjet 2 not charging

Carefully inspect the USB cable and adapter that came with your BlendJet 2. Faulty wires or adapters can hinder the charging process. Try an alternate cable or adapter to see if it makes a difference.

After connecting Blendjet 2 with the charging adapter, if the light is not blinking, you need to get a new and good-quality charging adapter and cable. I have been using a portable blender fast charger for a long time, and it is working well.

Restart Your BlendJet 2

Perform a Hard Reset

A hard reset can often resolve charging glitches. Press and hold the power button for 10 to 15 seconds, then release it. Attempt to capture your BlendJet 2 once again.

Allow for Battery Recharge

In some instances, the BlendJet 2 battery might be entirely drained. Allow the device to charge for a minimum of 15 to 20 minutes before attempting to power it on.

Clean the Charging Port

Clear Debris and Dust

Take a close look at the charging port on your BlendJet 2. Sometimes, accumulated debris, dust, or lint can obstruct the connection. Gently use a small brush or compressed air to clean the port.

Address Moisture Concerns

Moisture can interfere with the charging process. Ensure the charging port is completely dry before charging your BlendJet 2.

Update Firmware and Software

Firmware Updates

Visit the official BlendJet website to check for available firmware updates for your device. Outdated firmware can potentially lead to charging complications.

Verify Applicable Software

If your BlendJet 2 is compatible with a mobile app, ensure the app and the device’s software are updated with the latest versions.

Blendjet Customer Support

If none of the solution worked for you, then it’s time to get in touch with blendjet customer support. Lets use below information to connect with customer executive to resolve blendjet 2 not charging.
Contact No1-844-588-1555

Check Out Video On BlendJet 2 Not Charging

blendjet 2 not charging youtube guide

How To Prevent BlendJet 2 Not Charging Issue?

If you’re having trouble with your BlendJet 2 not charging, here are some tips to help:

  1. Make sure that the power adapter is securely connected and undamaged.
  2. Check the USB cable for any signs of wear or damage, and replace if necessary.
  3. Ensure that the power outlet you’re using is working correctly and providing enough power for your device by trying a different outlet with the same power adapter.
  4. Reset your BlendJet 2 if it still won’t charge by pressing and holding the button on the back for 10 seconds until you hear one beep sound.
  5. If all of the above troubleshooting steps don’t work, try charging your device with a USB wall adapter instead of the power adapter.
  6. If you’re still having issues, please contact our customer support team for assistance. We’re happy to help!
  7. Store the BlendJet 2 and all its components in a safe and dry place away from any direct sunlight or heat. This will help to extend the life of your device and keep its charging system in optimal condition.
  8. Always unplug the power adapter when not in use to avoid any potential issues with overcharging or overheating.
  9. Remember to charge your BlendJet 2 regularly – even if you don’t plan on using it right away! A full charge will help to keep it running at peak performance.
  10. Finally, remember to check your device’s charging ports periodically for any dust or debris that may be preventing a proper connection between the power adapter and BlendJet 2. Cleaning out these ports with compressed air can often resolve any issues you may be having.

We hope these tips will help you prevent any BlendJet 2 not charging issues in the future. Happy blending!

Don’t forget to also regularly clean and maintain your BlendJet 2 for optimal performance. Be sure to follow all instructions from your owner’s manual when cleaning or replacing parts on your device. Always use a damp cloth and soap-free detergent when wiping down the outside of the blender, and ensure that the motor base is completely dry before use. Additionally, always check for any signs of wear or tear before plugging your BlendJet 2 in to charge. Keeping an eye on these potential issues can help you get the most out of your device!

We hope this guide helps you keep your BlendJet 2 running smoothly. If you have any further questions or concerns, please reach out to our friendly customer support team. We’re always here to help!

Frequently Asked Questions On BlendJet 2 Not Charging

What could be causing my BlendJet 2 not to charge?

Factors like faulty cables, power source issues, or debris in the charging port could be responsible. The article provides steps to troubleshoot and resolve these issues.

How can I tell if my BlendJet 2’s battery is fully depleted? 

If your BlendJet 2 doesn’t respond when you attempt to power it on, it might be due to a completely drained battery. Charge it for a while and then try again.

Is it safe to use a different USB cable for charging?

Absolutely. Trying a different USB cable and adapter can help determine if the problem lies with the original accessories.

What if my BlendJet 2 still doesn’t charge after trying all the solutions?

If the troubleshooting steps don’t work, it’s best to contact BlendJet’s customer support for further assistance.

Are software updates crucial for addressing charging issues? 

Yes, outdated firmware can affect the charging process. Ensuring your BlendJet 2’s software is up to date is essential for preventing such problems.

So this is the end of the troubleshooting steps of BlendJet 2 Not Charging.If you are still facing an issue then kindly let us know in the comment section.

Leave a Comment